15 Ideas For Bathroom Remodeling

Use Lower-Cost Lookalike Materials

Retaining and refurbishing your existing materials is always the best option for saving money. But if you must swap out materials, inexpensive alternatives often can look amazingly like the real thing.

For example, instead of real wood plank flooring, try luxury vinyl flooring. Today’s vinyl flooring looks far better than earlier iterations. Innovations such as luxury vinyl flooring and plank vinyl can even fool the eye from a distance.

High-definition laminate countertops and quartz countertops now vie with granite for the look of authentic natural stone. Faux-stone ceramic and porcelain tile backsplashes can mimic the look of travertine and marble.

Paint Your Wooden Floor

If your bathroom happens to have a wooden floor, you can always cover it over with a more moisture-hardy flooring, such as tile, sheet vinyl, or luxury vinyl plank.

Or you can save time, energy, and money by keeping your wooden floor and painting it with protective enamel. Keep in mind, though, that solid hardwood should not be your first choice for bathroom flooring. But if you already do have wooden floors, this is one low-cost way to keep them around for as long as possible.

Refinish Your Tub Instead of Replacing It

Consider total replacement of your bathtub to be your last possible option, at least from a cost-saving standpoint.

Instead, try relining or refinishing. Bathtub and shower refinishing is a prime example of the dictum “Repair and retain rather than remove.” If the problem is mainly cosmetic, such as a yellowed surface and some cracks and nicks, you can refinish your shower or bathtub.

Alternatively, bathtub and shower liners, never a permanent fix, are not as affordable as they seem. Requiring professional installation, liners will carry you through a few years. Bathtub refinishing, instead, is more inexpensive and often looks better.

Touch Up Your Tub Rather Than Refinishing It

One step down from refinishing the entire tub surface is a tub touch-up. When your bathtub has nicks, gouges, and peeling paint, but you are not keen on the idea of refinishing the entire surface, you can spot-fix the tub.

Some touch-up products, such as Super Glue White Porcelain Repair, are as easy to apply as squeezing toothpaste out of a tube.

Refresh Cabinets With New Hardware

Buying and installing new bathroom cabinets can get expensive. A far easier and more affordable way to bring life to your existing cabinets is to strip out the old hardware and replace it with fun new hardware.

To make the process even easier, before you buy the new hardware, make sure that its screw alignment matches up with the holes on your existing cabinets. This eliminates the need to drill new holes.

Install a New Sink Faucet

As with installing new hardware on cabinets, installing a new sink faucet is one trick designers and do-it-yourselfers alike use to make a sink sparkle without replacing the entire top or vanity.

It helps that sink faucets are simple, easy, and fast to install by yourself. You don’t need to call a plumber. This not only saves on labor costs but it advances the time table. Pick up sink faucet in the morning and you’ll have it running by lunchtime; it’s that easy.

Install a Pre-Fabricated Shower

The most expensive option for a new shower is to hire a pro to build a custom tile shower from scratch. While site-built tile showers and tubs can be gorgeous and unique, consider a prefabricated shower unit, which typically costs a lot less.

If you want to have that tiled shower, fusing a poly shower pan with the tile saves hassle and costs. Building a tiled shower pan takes some time, and it’s usually best left in the hands of qualified tile setters.

Install Your Own Toilet

Plumbers are worth their weight in gold. But if you have the strength to carry a toilet, avoid calling in a plumber to switch out the old toilet. Instead, install your toilet by yourself.

Toilet installation involves very few waterline hookups. The hardest part of installing a toilet is physically moving the toilet into place. For that, buy an inexpensive hand truck or enlist the services of a friend.

Paint Portions of the Interior by Yourself

Interior painting can be accomplished by even the least skilled do-it-yourselfer. For whole-house painting, you may want to consider hiring a professional painter, due to the large scale.

But consider how little painting you need to do in bathrooms. The majority of wall space is taken up with mirrors, showers, tile, cabinets, and bathtubs. In the end, you only have a few square feet to paint. In many cases, you can paint this by yourself in a day or two.

Resist the Urge to Move Major Plumbing

Save money by leaving the toilet and bathing facilities where they are. There’s no need to move the plumbing when their current locations satisfy your needs. Moving water supply and/or drainage immediately drives up the cost of any remodel project.

Do Some Plumbing by Yourself

Intimidated by the idea of doing your own plumbing? Think again.

If you hate calling upon the services of a plumber for remodeling work, stop for a minute and ask yourself what you might be able to do on your own.

With the advent of plastic PEX plumbing pipes and push-in fittings, even the least confident do-it-yourself plumber can tackle light plumbing tasks with relative ease. If your notion of plumbing work is still rooted in the days of soldering copper pipes with an open flame or working with galvanized pipes, give this idea some serious thought. You just might find out that PEX and push-in fittings are perfect for your needs.

Install Your Own Bathroom Vanity and Top

Bathroom vanities and tops practically come assembled for you. Because bathrooms are small, it is possible for you to buy nearly or fully assembled bathroom vanity units and vanity tops and have them in place within a couple of hours.

Vanity units come in stock sizes ranging from 24 inches to 60 inches wide. Coordinating counters can be purchased that even have sinks fused into them, eliminating sink installation and caulking woes.

Migrate Bathroom Materials

If you have two bathrooms and you remodel one of them, what should you do with all of those materials? Some homeowners have found that it is cost-effective to migrate materials from one bathroom to the other bathroom. Even materials as trivial as shower curtains, pipes, and picture frames can be moved to the next bathroom.

Not only do you save money because you don’t need to buy new items, but you also save on hauling or dumpster costs. Plus, you get to help the environment by not sending non-biodegradable materials to the landfill.

Design the Bathroom by Yourself

While bathroom designers are great, they also can break your bathroom remodel budget. Consider designing your bathroom by yourself.

Whole-house remodels, additions, and large kitchens can benefit from the expertise of a qualified designer. But bathrooms in most houses aren’t so complicated.

Spending some time studying bathroom layouts and learning the basic bathroom design guidelines (such as recommendations from the National Kitchen and Bath Association) can give you plenty of ideas to get started.

Install Wainscot on Lower Half of Walls

If a bathroom material still works, fix it up and reuse it. This is the guiding principle of any surface-level renovation (with the caveat that you never want to cover anything because it needs to be replaced).

For example, there is no better way to cover up the lower portion of walls than with easy-to-install wainscot. Wainscot is a pre-fabricated board that extends as high as 48 inches and eliminates the need to patch wall dings and minor holes; wainscot simply covers it up.