English
Français
Deutsch
Italiano
Русский
Español
简体中文
हिन्दी
日本語
Hours of fun and play every week don’t always require a trip to the park: By building your own DIY outdoor playground, you can have plenty of entertainment right at home. Adding slides, ladders, rock walls, and more are all great DIY playground ideas for your backyard.
This design appeals to kids of all ages. Turn your whole backyard into a playground by adding a lower sandbox for young children to enjoy safely, then adding a swing and zip line for their older siblings and friends to play from the upper level. Best of all, this playground is entirely flexible. You can build the central two-level climbing structure in about a week. Scale it up whenever you like by adding on new playground features. You can add optional flooring like sand or rubber tiles, or you can locate the playset on a grassy area for a safe surface.
Below, find DIY playground plans, features, and important considerations to help you get started.
Main DIY Playground Features
- Central Climbing Structure: The heart of the DIY playground is the four-post, two-level central climbing structure. Here, kids can scamper up a ladder to the upper level or they can play below. It’s a sturdy hub for all other features.
- Ladder: A short ladder that you easily build from scratch brings kids from the ground level to the upper level.
- Rock Climbing Wall: Kids can hone their rock-climbing skills with this short rock wall that’s tilted slightly for safety. Molded rock holds purchased separately screw easily onto the rock wall base.
- Sandbox: Two-by-ten skirt boards at the base of the climbing structure provide extra stability. They’re also built-in walls for a sandbox. Just add sand and you’re ready to go.
- Slide: The central structure is a perfect place to attach a plastic slide.
- Swing: Purchase or make a swing, with one end of the upper bar attached to the central climbing structure and the other end elevated on its own stand.
- Extra Fun Features: Purchase or make flags, a ship’s wheel or steering wheel, telescope, or zip line and add to the upper level of the playground.
- Flooring: Flooring for your DIY backyard playground is an optional feature that can be added by using rubber mulch or flooring rolls, playground tiles, turf, or even sand to offer a safe and comfortable base. You can also build your playset on grass to have soft ground beneath it as a budget-friendly option.
Cost of a DIY Playground
Building your own DIY playground is considerably cheaper than building a pre-made playground system.
Expect to pay $3,500 to $5,000 for a pre-made playground with a similar raised upper level, including a sandbox, picnic table, two-person swing, and an enclosed clubhouse on top.
At the lower end of the pre-made price range, a small two-level playground more appropriate for preschoolers, with an enclosed playhouse, staircase, and ladder, runs around $750 to $1,000.
Alternatively, it costs between $800 and $1,500 to build your own playground. The central climbing structure, ladder, and sandbox alone are in the lower range of this cost estimate. The main price drivers are extra features that you can purchase, such as the slide, swing, or zip line.
Permits and Codes
Municipalities have different approaches to permitting for backyard play structures. Some communities allow one- or two-story structures, such as playground sets, under certain size and height limits. Sizes may range from 120 to 200 square feet. Maximum height limits may range up to 12 feet. Check with your local permitting office for guidance, and check any HOA regulations, if applicable.
Safety Considerations
Observe all safety precautions for working with power tools. Take care when working on the playground’s upper level.
What You’ll Need
Equipment / Tools
- Cordless drill
- Electric miter saw
- Circular saw
- Stakes and twine
- Bubble level
- Post-hole digger
- Flat shovel
- Garden hose and water source
- Tape measure
Materials
Building Materials
- Quick-set concrete
- Gravel
- 4 four-by-fours, each 16-foot, pressure-treated
- Scrap two-by-fours, pressure-treated
- 13 two-by-tens, 8-foot, pressure-treated
- 10 joist hangers
- 20 5-1/4 inch by 8-foot composite wood deck boards
- 34 two-by-fours, pressure-treated
- 2 door hinges
Playground Items
- Rock holds
- Climbing rope
- Playbox sand
- Slide
Instructions
How to Build a DIY Playground
-
Plan DIY Playground
This playground’s footprint is 64 square feet: 8 feet on each side. The upper level is 5 feet above ground level, or as high as you need to accommodate a slide.
Find a suitable location for the playground that’s close to the house, dry, and with stable ground that you can dig into. Provide a 16-foot buffer zone around the playground. No obstructions such as bushes, rocks, trees, or the house should be in the buffer zone. Do not locate the playhouse under trees with low-hanging limbs.
-
Lay Out Posts
Stake out the four post locations in a square, using the twine and stakes. To make sure that it is truly square, measure the two opposing diagonals. If the measurements match, the layout is a true square.
Warning
Before digging, call your local utility location service to identify the location of electrical wires, pipes, and other vital services.
-
Remove Turf and Grade
If applicable, remove the turf with the flat shovel and level the surface down to bare dirt. Grade the surface until it is level. Check level by placing the bubble level on a two-by-four in different directions on the ground.
-
Dig Post Holes
With the post hole digger, dig four post holes to below the frost line, plus another 4 inches to account for the gravel base. The width of each post hole should be at least two times the diameter of the post, or about 8 inches wide.
-
Add Gravel
Pour gravel into the bottoms of the post holes. Measure out about 4 inches of gravel per hole.
-
Plumb and Set Posts
Set the four-by-fours in the post holes. Support each post individually with scrap two-by-fours set up as braces. Screw one end of the two-by-four to the four-by-four. Stake the other end into the ground.
Add concrete at this point to help stabilize the posts. The concrete should be added dry and brought to about 3 inches below ground level. Use the bubble level to get each post perfectly plumb.
-
Attach Horizontal Bracing
Attach four of the two-by-tens in a square around the outside of the four-by-four posts. Attach them at the 5-foot-high mark (or your desired upper-level floor height).
-
Set Posts in Concrete
With the garden hose, slowly fill each post hole with water, letting the water percolate through the dry concrete mix until full. Allow a day for the concrete to fully cure.
-
Add Sandbox Walls
Similar to the upper horizontal bracing, attach four two-by-tens at ground level to form the walls of the sandbox.
-
Add Joists
Install ten joist hangers, five on each side of the upper level bracing. Space them 16 inches apart. Insert five of the two-by-tens into the hangers. Secure the joists into the hangers with nails designed for use with joist hangers.
-
Install Flooring
Install the composite wood flooring on top of the joists, spacing each board by 1/8 inch.
-
Build Ladder
Cut two of the two-by-fours to 5 feet long. Cut the scrap wood into two 2-foot pieces and use another, fresh two-by-four to cut two more pieces. Screw the pieces together to make a four-rung ladder. Screw the ladder into the upper level bracing and the lower sandbox wall.
-
Build Rock Wall
Cut two of the two-by-fours to 6 feet long. Cut nine of the two-by-fours in half. Run the resulting 18 pieces of wood across the 6-foot-long pieces to form a ladder-like structure. Space the rungs 1/4-inch apart. Screw the two hinges to the back of the rock wall, at the top. Screw the other side of the hinges to the upper level bracing. Screw rock holds across the rungs in a random fashion.
-
Build or Add Slide
Screw the slide to the upper level bracing, so that the lip of the slide is flush with the top of the deck.
-
Build Balusters / Handrail
Use 20 full-size two-by-fours to form the horizontal balusters around the upper level of the playground. You will use five two-by-fours per side, spacing them 8 inches from each other, culminating at a top handrail that is 48 inches high. Create cut-out spaces for the ladder, slide, and any other feature attached to the upper level.
-
Add Swing
Attach a swing to the side of the DIY playground. You can use a purchased swing set, eliminating one of the side legs. The side of the playground would replace the leg. Or you can build your own swing set from pressure-treated ground contact lumber, again eliminating one of the legs in favor of the playground as a type of leg.
-
What is the safest surface for a playground?
There are many options for playground flooring that provide a soft, safe surface for kids when the inevitable trips and falls happen from time to time. Rubber mulch, rubber tiles, sand, and grass are all great bases for playgrounds at home, while engineered wood fiber (similar to wood mulch) is commonly found in large outdoor playgrounds.
-
Why do playgrounds cost so much?
Pre-made playgrounds are more expensive than DIY playgrounds due to the many parts they require for a finished assembly. Rather than buying a single slide or sandbox, most playgrounds include structures for a second story, handrails, roofs, sturdy metal posts, and more. Having the playground assembled by the seller also increases the overall price by adding labor costs.
-
What is the average size of a typical playground?
Backyard playgrounds are typically about 100 square feet in size, which can be smaller or larger based on the addition of extra features (not including the play area surrounding them). On the other hand, commercial playgrounds at parks and schools are much larger, often reaching 2,500 to 5,000 square feet in total.
Read the full article here
